Skip to main content
Welcome guest. | Register | Login | Post

Networking


Introduction

This tutorial is intended for people with at least basic Unix knowledge, such as mounting filesystems and copying files.

OpenSSH, an OpenBSD project, is an incredibly secure implementation of the SSH protocol, a way of logging into a remote machine. For users of outdated protocols such as RSH, rlogin, and Telnet, it's an updated, secure replacement. For those who have never used anything like it, SSH can become a very valuable tool.


Recently, I wrote an article about How to scan your Linux-Distro for Root Kits.
Now that the machine is... clean! I think, a good thing TO-DO, is to test my Firewall (AGAIN !!!)
The good news are that we can use the free tool FTester.
The bad news are that FTester needs to be configured right...

So... Let's get to work !

What is FTester ?
The Firewall Tester (FTester) is a tool designed for testing firewalls filtering policies and Intrusion Detection System (IDS) capabilities.

The tool consists of two perl scripts, a packet injector (ftest) and the listening sniffer (ftestd).
The first script injects custom packets, defined in ftest.conf, with a signature in the data part while the sniffer listens for such marked packets.
The scripts both write a log file which is in the same form for both scripts.
A diff of the two produced files (ftest.log and ftestd.log) shows the packets that were unable to reach the sniffer due to filtering rules if these two scripts are ran on hosts placed on two different sides of a firewall.
Stateful inspection firewalls are handled with the 'connection spoofing' option.
A script called freport is also available for automatically parse the log files.

The IDS (Intrusion Detection System) testing feature can be used either with ftest only or with the additional support of ftestd for handling stateful inspection IDS, ftest can also use common IDS evasion techniques.
Instead of using the configuration syntax currently the script can also process snort rule definition file.

Features:
- firewall testing
- IDS testing
- simulation of real tcp connections for stateful inspection firewalls and IDS
- connection spoofing
- IP fragmentation / TCP segmentation
- IDS evasion techniques

Requirements:
The following perl modules are required: Net::RawIP, Net::PcapUtils, NetPacket

So... we will need the Net::RawIP , Net::PcapUtils, and NetPacket Perl modules. We may also need the Net::Pcap module if it is not already installed, because the Net::PcapUtils module depends on it.
If we have the CPAN Perl module, we may install these modules with the following commands from shell:
# perl -MCPAN -e "install Net::RawIP"